Kyocera KM-1530 Instruction Handbook Manual page 37

Default code Setting item
Non-standard size paper width
F13
setting for multi-bypass
F14
Output mode
F15 Rotate sort
F16 Copy limit
F17 Margin width
F18 Border width
F19 Layout (4 in 1)
F20 Layout (borderline)
F21 Transparency mode
Setting contents
Sets the paper width for the multi-bypass to use non
standard size paper such as 11" x 8 1/2" paper.
Select "Sort ON" to have sorting performed automatically
when the ADF is used. If "Sort OFF" is selected, sorting will
not be performed. To use the sort mode when "Sort OFF" is
selected or when placing originals on the platen, press the
Sort key to light the Sort indicator.
* This setting item will not be displayed if the optional
memory board and ADF are not installed.
Sets whether the normal sort copy (see page 5-6) or rotate
sort copy (see page 5-6) is used when the sort mode is
selected.
* This setting item will not be displayed if the optional
memory board is not installed.
Limits the number of copies that can be made at a time.
Sets the initial value of the margin width for the margin copy
mode (see page 5-1).
* This setting item will not be displayed if the optional
memory board is not installed.
Sets the initial value of the border erase width for the Sheet
Erase or Book Erase in the border erase mode (see page
5-2).
* This setting item will not be displayed if the optional
memory board is not installed.
Sets whether to place the originals vertically or horizontally
for 4 in 1 layout copying (see page 5-4).
* This setting item will not be displayed if the optional
memory board is not installed.
Selects the type of borderline for layout copying (see page
5-4).
* This setting item will not be displayed if the optional
memory board is not installed.
When coping onto transparencies or thick paper using the
multi-bypass, select the paper type using this setting.
CHAPTER 6 COPIER MANAGEMENT
4.0"~11.0"
( 4.0")
*
1: Sort ON
2: Sort OFF
1: ON
2: OFF
1 to 250 copies (250
copies
1: 1/4 inches
2: 3/8 inches
3: 1/2 inches
4: 5/8 inches
5: 3/4 inches
1: 1/4 inches
2: 1/2 inches
3: 3/4 inches
1: Horizontal (Z)
2: Vertical (N)
1: None
2: Solid line
3: Dotted line
1: Transparencies
2: Thick paper
Setting code
*
*
)
*
*
*
*
*
*
6-6