Enlargement/Reduction; Auto Magnification Selection Mode; Zoom Copy - Kyocera KM-1530 Instruction Handbook Manual

CHAPTER 4 BASIC OPERATIONS

2. Enlargement/reduction

(1) Auto magnification selection mode

The original image is enlarged/reduced automatically according to the
selected paper size.
1
Check that the AMS indicator is lit. If not, press the auto
mode selection key to light the indicator.
2
Set the original(s).
The size of the original will be automatically detected and the
paper of the same size as the original will be selected.
3
Press the Paper Select key to specify the paper size.
The magnification ratio indication flashes and then changes
to the indication of the number of copies.
* Copying will start when the Start key is pressed.
4-3

(2) Zoom copy

The zoom ratio can be set to any value from 50 to 200% in 1%
increments.
1
Set the original(s).
2
Press the Zoom (+) or Zoom (-) key to change the displayed
zoom ratio.
"%" lights on the magnification display.
NOTE
After pressing the Zoom (+) or Zoom (-) key, the zoom ratio can also
be entered using the numeric keys.
3
Press the Recall % key. The zoom ratio will be set and the
display indication changes from the magnification to the
number of copies.
* If a zoom ratio other than 100% is set, the Recall %
indicator will light.
* Press the Paper Select key to change the paper size.
* Copying will start when the Start key is pressed.