Kyocera KM-1530 Instruction Handbook Manual page 28

CHAPTER 5 FUNCTIONS
1
To change the erasing border width, press and hold the
Border Erase key or Book Erase key for 3 seconds. "F18"
appears on the copy quantity display and, 2 seconds later, a
number appears. If you do not wish to change the erasing
boarder width, press either key and proceed to step 4.
The number displayed indicates the erasing boarder width as
follows:
1: 1/4"
2: 1/2"
3: 3/4"
2
Press the Zoom (+) or Zoom (-) key and change the number
to select the erasing border width.
3
Press the enter key, Border Erase key or Book Erase key.
The number of copies appears on the display. The Sheet
Erase or Book Erase mode is now selected.
5-3
4
Set the original(s).
* Set book originals as shown in the illustration below.
5
Press the Start key. Copying will start.