Table of Contents
Advertisement
XG700 User's Guide
5.15.6 monitor vlan-traffic-bytes
Function
Displays the received byte count of each VLAN.
Prompt
xg> or xg#
Command syntax
monitor vlan-traffic-bytes { current | total } [interval <3-60>]
Parameter
{ current | total }
Specifies the statistics to be displayed.
−
−
interval <3-60>
Specifies the statistics updating interval (in seconds).
The default interval is 3 seconds.
Command type
Operation management command
Output format (if "current" is specified)
xg# monitor vlan-traffic-bytes current
VLAN Traffic Statistics(Current Frame Bytes) 2005/08/22-12:12:15
================================================================
VID
Rx-Frame
Bytes
---- ----------- ------------
1 1234567890
10
20 1234567890K
30
40
4094
================================================================
ESC:exit
U:page up
VID
Displays the VID of the VLAN which has been set to collect its statistics. Statistics of each VLAN are displayed on a
line.
Specify the VLAN to collect its statistics using the "vlan-statistics collection" command.
Rx-Frame Bytes
Displays the cumulative byte count of frames which have been received at the specified VLAN (after the startup of this
command), using a 10-digit, right-justified value.
Rx-NonUcast Bytes
Displays the cumulative byte count of multicast or broadcast frames which have been received at the specified VLAN
(after the startup of this command), using a 10-digit, right-justified value
Output format (if "total" is specified)
xg# monitor qos-priority-traffic-bytes total
VLAN Traffic Statistics(Total Frame Bytes) 2005/08/22-12:12:15
==============================================================
VID
Rx-Frame
Bytes
---- ----------- ------------
1
1234567890
10
20 1234567890K
30
40
4094
==============================================================
ESC:exit
U:page up
The bytes displayed in the "Bytes" column are the ones cumulated after the system startup. Other values are the same as
those displayed if the "current" option is specified.
current
Displays the cumulative byte count of received frames for each VLAN after startup of this command.
total
Displays the cumulative byte count of received frames for each VLAN after the system startup.
Rx-NonUcast
Bytes
1234567890
0
0
1234567889K
25690M
25690M
25690G
25690G
0
0
F:refresh
D:page down
L:page left R:page right
Rx-NonUcast
Bytes
1234567890
0
0
1234567889K
25690M
25690M
25690G
25690G
0
0
F:refresh
D:page down
L:page left R:page right
All Rights Reserved, Copyright (C) PFU LIMITED 2005-2006
177/266
Advertisement
Table of Contents
