Clear Maintenance - Fujitsu XG700 - Switch User Manual

XG700 User's Guide
Example
Save the current system status data as the maintenance information in the non-volatile memory, and check the logging status
of the maintenance information using the "show maintenance" command.
Then, transfer the maintenance information to the "host1" TFTP server by naming it as the "mainte_collected date and time"
file.
Compare the file size of the maintenance information displayed on the screen and the size of the file stored at the destination.
xg# save maintenance
xg# show maintenance
Maintenance Information
==================================================
NO Type
--- -------------------------- -------------------
==================================================
xg# tftp put-maintenance host1
Total file size: 480711 (bytes)

5.19.7 clear maintenance

Function
Clears the maintenance information from the non-volatile memory of the XG700.
Prompt
xg#
Command syntax
clear maintenance
Command type
Operation management command
Notes
Issue the "clear maintenance" command only after you have checked the successful information transmission to the
TFTP server using the "tftp put-maintenance" command.
Example
Clear the maintenance information from the non-volatile memory of system hardware:
xg# clear maintenance
1 system dump
2 system dump(dump switch)
3 system dump(machine check)
All Rights Reserved, Copyright (C) PFU LIMITED 2005-2006
2005/08/22-20:58:17
Occurred Time
2005/08/22-18:21:23
2005/08/22-20:57:58
2005/08/22-20:58:14
213/266