Fujitsu XG700 - Switch User Manual page 130

XG700 User's Guide
Output form (in detailed display)
xg# show spanning-tree detail
Spanning Tree Information
===============================================================================
Switch Information for Spanning Tree
---------------------------------------------------------------
Spanning Tree
Root Switch Priority: 32768
Root Switch ID
Root Path Cost
Root Port
Switch Priority
Switch ID
Max Age
Hello Time
Forward Delay
Topology Changes
Last Topology Change: 2005/08/22-12:12:15
portfast errdisable : {enabled | disabled}
timeout
portfast errdisable : 300 sec
timeout interval
----------------------------------------------------------------
Ports Information for Spanning Tree
-----------------------------------------------------------------------------
[Port 1]
STP State
STP Mode
Port ID
Role
Path Cost
Link Type
Forward-Transitions : 0
Portfast
Portfast bpdu-guard : {Disabled | Enabled}
Portfast bpdu-filter: {Disabled | Enabled}
BPDU Parameter
Designated Path Cost: 0
Designated Port ID
Designated Priority : 128
Designated Root ID
Designated Switch ID: 0000.0000.0000.0000
Max Age
Message Age
Message Age Timer
Hello Time
Hello Timer
Forward Time
Forward Timer
Received STP Protocol: None
[Port 2]
-----------------------------------------------------------------------------
=============================================================================
Switch Information for Spanning Tree
Spanning Tree Protocol information on switch in general is displayed.
The display content is the same as the case of the simplified display.
Ports Information for Spanning Tree
Spanning Tree Protocol information for each port is displayed.
[Port 1]
The switch port number is displayed.
STP State
The state of the port by STP (Spanning Tree Protocol) is displayed.
The display content is the same as the case of the simplified display.
STP Mode
The mode of Spanning Tree Protocol corresponding to the port is displayed. The display content is the same as the
case of the simplified display.
Port ID
The Port ID of the switch port is displayed.
Role
The role of the port is displayed.
−
−
−
−
Path Cost
The path cost of the port is displayed.
: {Enable | Disable}
: 8000.0080.17C2.0511
: 6
: port-1
: 32769
: 8001.0080.17C2.0512
: 20 (sec)
: 2 (sec)
: 15 (sec)
: 0
: {Down | Discard | Learn | Forward }
: {STP | RSTP | None}
: 32772
: {Root | Designated | Alternate | Backup}
: 2
: { Point-to-point | Shared }
: {Disabled | Enabled}
: 0
: 0000.0000.0000.0000
: 20 (sec)
: 0 (sec)
: 0 (sec)
: 2 (sec)
: 0 (sec)
: 15 (sec)
: 0 (sec)
Root
The root Port.
Designated
The designated port.
Alternate
The alternate port.
Backup
The backup port.
All Rights Reserved, Copyright (C) PFU LIMITED 2005-2006
2005/08/22-12:12:15
130/266