Table of Contents
Advertisement
XG700 User's Guide
Protocol
The control protocol to comprise a link aggregation is displayed.
−
−
−
Distribution algorithm
Displays the distribution method of frame forwarding destination.
−
−
−
Distribution parameter
Displays the parameter to calculate the frame distribution method.
The minimum number of ports
Displays the port number in link up state required to maintain link up state of the aggregation group.
Static link aggregation specific information
This is used to display the state of each port comprising a static link aggregation.
[port 1]
Indicates the port number to display.
Port Status
The status of the port is displayed.
−
−
Output form (in case of LACP link aggregation)
xg# show link-aggregation
Link Aggregation Information
===============================================================================
System Priority : 32768
System ID
-------------------------------------------------------------------------------
[agg-port 1]
Master port
Management packet send port : port <1-12>
Mac address
Protocol
Distribution algorithm
The minimum number of ports : 1
System Key
Partner System Priority
System ID
Key
[port 1]
Port Status
Port Priority
Synchro State
Receive State
Periodic Tx State
Partner Port Priority
Partner Port Number
Partner Synchro State
[port 2]
Port Status
Port Priority
Synchro State
Receive State
Periodic Tx State
Partner Port Priority
Partner Port Number
Partner Synchro State
[agg-port 2]
===============================================================================
None
Comprises a static link aggregation.
LACP - Active
Uses LACP as the control protocol for link aggregation, and comprises a link aggregation by LACP in Active
mode.
LACP - Passive
Uses LACP as the control protocol for link aggregation, and comprises a link aggregation by LACP in Passive
mode.
Destination address
This is a distribution method based on the destination MAC address of a frame.
Source address
This is a distribution method based on the MAC address from which a frame is sent.
Destination address & Source address
This is a distribution method based on the information of the destination MAC address of a frame and the MAC
address from which a frame is sent.
Active
The port is usable.
Inactive
The port is not usable.
: 0080.17c2.05e2
: port <1-12>
: 0080.17c2.2144
: { LACP - Active | LACP - Passive }
: { Destination address | Source address
| Destination address & Source address}
: 1
: 32768
: 0080.17c2.05e2
: 2
: {Active | Inactive }
: 32768
: { Sync | No Sync }
: { Invalid | Initialize | Port Disabled | LACP Disabled| Expired
| Defaulted| Current}
: { Invalid | No Periodic | Fast Periodic | Slow Periodic }
: 32768
: 10011
: { Sync | No Sync }
: { Active | Inactive }
: 32768
: { Sync | No Sync }
: { Invalid | Initialize | Port Disabled | LACP Disabled | Expired
| Defaulted| Current}
: { No Periodic | Fast Periodic | Slow Periodic }
: 32768
: 11
: { Sync | No Sync }
All Rights Reserved, Copyright (C) PFU LIMITED 2005-2006
2005/04/24-16:16:36
103/266
Advertisement
Table of Contents
