Table of Contents
Advertisement
XG700 User's Guide
5.3.5 telnet-sever
Function
Enables telnet connection with the XG700.
Use the no form to disable telnet connection.
Prompt
xg(config)#
Command syntax
telnet-server
no telnet-server
Command type
Configuration command
Default
Disabled
Example
Enable telnet connection to the XG700.
xg(config)# telnet-server
5.3.6 terminal window
Function
Sets the screen display size in the serial connection terminal.
Use the no form to return to the default setup.
Also, in telnet connection, the screen size will be obtained automatically from the software in the client terminal.
Prompt
(config-line)#
Command syntax
terminal window <50-200> <12-100>
Parameter
<50-200>
Specifies the number of columns (horizontal) of the screen. It can be set in the range of 50 to 200
<12-100>
Specifies the number of lines (vertical) of the screen. It can be set in the range of 12 to 100.
Command type
Configuration command
Default
80 columns by 24 lines
66/266
All Rights Reserved, Copyright (C) PFU LIMITED 2005-2006
Advertisement
Table of Contents
