Creating A New Hard Disk; Partitioning And Configuring A New Hard Disk - Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - ZENWORKS APPLIANCE DEPLOYMENT AND ADMINISTRATION REFERENCE 10.3 16-04-2010 Deployment Manual

3.3.1 Creating a New Hard Disk

1 Start the VMware VSphere Client application.
2 Right-click the virtual machine on which you have deployed ZENworks Appliance, then click
Edit Settings.
3 In the Virtual Machine Properties dialog box, click Add to launch the Add Hardware Wizard.
4 On the Select a Device page, select Hard Disk, then click Next.
5 On the Select a Disk page, click Create a new virtual disk, then click Next.
6 On the Create a Disk page, do the following:
6a Specify the disk capacity.
6b Specify whether you want to use the thin provisioning or clustering support feature.
6c Select the location as either Store with the virtual machine or Specify a datastore.
6d (Conditional) If you select the Specify a datastore option, browse for and select the
datastore location.
The new hard disk is stored in the same folder along with the other virtual machine files
on that datastore.
6e Click Next.
7 (Optional) On the Advanced Options page, specify the advanced options for the new virtual
disk, then click Next.
8 On the Ready to Complete page, review the summary, then click Finish.
9 Continue with

3.3.2 Partitioning and Configuring a New Hard Disk

1 Use the YaST
Hard Disk" on page
For more information on how to partition a new hard disk by using the YaST Partitioner, see
"Using the YaST Partitioner" (http://www.novell.com/documentation/sles10/
book_sle_reference/?page=/documentation/sles10/book_sle_reference/data/
sec_yast2_sysconfig.html)
www.novell.com/documentation/sles10/).
2 On the machine to which you have deployed ZENworks Appliance, open a terminal and run the
following command to stop all the running services:
novell-zenworks-configure -c Start
3 Take a backup of the
into the
mv /var/opt/novell/zenworks /var/opt/novell/zenworks.bak
4 Mount the new hard disk partition at the
For more information on how to mount a hard disk partition, see
(http://www.novell.com/documentation/sles10/book_sle_reference/?page=/documentation/
sles10/book_sle_reference/data/sec_yast2_sysconfig.html)
Administration Guide
26 ZENworks 10 Configuration Management Appliance Deployment and Administration Reference
"Partitioning and Configuring a New Hard Disk" on page
®
Partitioner to partition the new hard disk that you created in
26.
in the
/var/opt/novell/zenworks
/var/opt/novell/zenworks.bak
(http://www.novell.com/documentation/sles10/).
SLES 10 SP2 Installation and Administration Guide (http://
directory that contains the ZENworks data
directory by running the following command:
/var/opt/novell/zenworks
26.
"Creating a New
directory.
"Using the YaST Partitioner"
in the SLES 10 SP2 Installation and