If Source Attribute - Novell POLICY IN DESIGNER 3.5 - 09-18-2009 Manual

If Source Attribute

Performs a test on attribute values of the current object in the source data store. The test performed
depends on the specified operator.
Fields
Name
Specify the name of the source attribute to test for the selected condition. Supports variable
expansion. For more information, see
Operator
Select the condition test type.
Operator
Available
Equal
Greater Than
Less Than
Not Available
Not Equal
Not Great Than
Not Less Than
Value
Contains the value defined for the selected operator. The value is used by the condition. Each
value supports variable expansion. For more information, see
on page
Equal
Greater Than
Less Than
Not Equal
Not Greater Than
Not Less Than
224 Policies in Designer 3.5
Returns True When...
There is a value available in the source data store for the specified
attribute.
There is a value available in the source data store for the specified
attribute. It equals the specified value when compared by using the
specified comparison mode.
There is a value available in the source data store for the specified
attribute that is greater than the content of the condition when compared
by using the specified comparison mode. If the mode is structured, the
content must be a set of components; otherwise, it must be text.
There is a value available in the source data store for the specified
attribute that is less than the content of the condition when compared by
using the specified comparison mode. If the mode is structured, the
content must be a set of components; otherwise, it must be text.
Available would return False.
Equal would return False.
Greater Than or Equal would return False.
Less Than or Equal would return False.
35. The operators that contain the value field are:
Section 3.6, "Variable Selector," on page
Section 3.6, "Variable Selector,"
35.