Pre-Identity Manager 3.5 Builders; Action Builder; Creating An Action; Additional Options For The Action Builder - Novell POLICY IN DESIGNER 3.5 - 09-18-2009 Manual

Pre-Identity Manager 3.5 Builders

1 6
Although you define most arguments by using the Argument Builder, there are several more builders
that are used by the Condition Editor and Action Editor in the Policy Builder. Each builder can
recursively call anyone of the builders in the following list:
Section 16.1, "Action Builder," on page 375
Section 16.2, "Actions Builder," on page 376
Section 16.3, "Argument Builder," on page 377
Section 16.4, "Action Argument Component Builder," on page 381
Section 16.5, "Condition Builder," on page 382
Section 16.6, "Condition Argument Component Builder," on page 383
Section 16.7, "Match Attribute Builder," on page 383
Section 16.8, "Named String Builder," on page 385
Section 16.9, "Pattern String Builder," on page 386
Section 16.10, "Argument Value List Builder," on page 388
Section 16.11, "Namespace Editor," on page 388

16.1 Action Builder

The Action Builder enables you to add, view, and delete the actions that make up a rule. Action can
also contain other actions.

16.1.1 Creating an Action

1 In the Policy Builder, create a new rule or edit an existing rule.
2 Double-click the Actions tab to launch the Action Builder.
3 Select the desired action from the drop-down list, then click OK.

16.1.2 Additional Options for the Action Builder

1 Right-click the action to see the additional options:
Pre-Identity Manager 3.5 Builders
16
375