If Association - Novell POLICY IN DESIGNER 3.5 - 09-18-2009 Manual

If Association

Performs a test on the association value of the current operation or the current object. The type of
test performed depends on the operator specified by the operation attribute.
Fields
Operator
Operator
Associated
Available
Equal
Greater Than
Less Than
Not Associated
Not available
Not Equal
Not Greater Than
Not Less Than
Value
Contains the value defined for the selected operator. The value is used by the condition. Each
value supports variable expansion. For more information, see
on page
Equal
Greater Than
Less Than
Not Equal
Not Greater Than
Not Less Than
Mode
The condition has a comparison mode parameter that indicates how a comparison is done.
190 Policies in Designer 3.5
Returns True When...
There is an established association for the current object.
There is a non-empty association value specified by the current
operation.
The association value specified by the current operation is exactly equal
to the content of the if association.
The association value specified by the current operation is greater than
the content of the condition when compared by using the specified
comparison mode.
The association value specified by the current operation is less than the
content of the condition when compared by using the specified
comparison mode.
There is not an established association for the current object.
The association is not available for the current object.
The association value specified by the current operation is not equal to
the content of the if association.
Greater Than or Equal would return False.
Less Than or Equal would return False.
35. The operators that contain the value field are:
Section 3.6, "Variable Selector,"