Moving The Cursor In The Hex Editor; Exporting Data From The Hex Editor - Novell POLICY IN DESIGNER 3.5 - 09-18-2009 Manual

Data is deleted from the current cursor position.
If you select From the cursor position to the end, it deletes all data in the Hex editor from the
cursor position in the table to the end of the table.

9.4.8 Moving the Cursor in the Hex Editor

You can move the cursor to a specified position in the Hex editor:
1 Right-click in the Hex editor, then select Goto.
2 Select whether the address specified in the table is a Decimal or Hexadecimal offset, then
specify the value.
3 Select the mode of moving the cursor:
Absolute: Moves the cursor to the specified offset.
Relative Down: Moves the cursor down from where the cursor is currently located in the
Hex editor.
Relative Up: Moves the cursor up from where the cursor is currently located in the Hex
editor.
4 Click OK to move the cursor.

9.4.9 Exporting Data from the Hex Editor

You can export data from the Hex editor to a file.
1 Click Export in the Hex editor.
2 Specify a filename and location for the file, then click Save.
162 Policies in Designer 3.5