Condition Builder; Creating A Condition; Additional Options For The Condition Builder; Section 4.4, "Condition Builder - Novell POLICY IN DESIGNER 3.5 - 09-18-2009 Manual

The argument takes the first character of the Given Name attribute and adds it to the Surname
attribute to build the desired value.
8 Click Finish to save the argument.

4.4 Condition Builder

The Condition Builder enables you to add, view, and delete the conditions that make up a rule. A
condition contains one or more conditions and one or more condition groups. The condition groups
contain two different condition structures, which define the logic of condition groups. The two
condition structures are:
OR Conditions, AND Groups
AND Conditions, OR Groups
To create and customize a condition, see the following sections:
Section 4.4.1, "Creating a Condition," on page 52
Section 4.4.2, "Additional Options for the Condition Builder," on page 52

4.4.1 Creating a Condition

1 In the Policy Builder, create a new rule or edit an existing rule.
2 Double-click the Conditions tab to launch the Condition Builder.
3 Select the desired condition from the drop-down list, then click OK.

4.4.2 Additional Options for the Condition Builder

There are additional options in the condition builder to manage the conditions. Right-click the
condition to see the additional options.
52 Policies in Designer 3.5