If Operation Property - Novell POLICY IN DESIGNER 3.5 - 09-18-2009 Manual

If Operation Property

Performs a test on an operation property on the current operation. An operation property is a named
value that is stored as an attribute on an
typically used to supply additional context that might be needed by the policy that handles the
results of an operation. The test performed depends on the selected operator.
Fields
Name
Specify the name of the operation property to test for the selected condition. Supports variable
expansion. For more information, see
Operator
Select the condition test type.
Operator
Available
Equal
Greater Than
Less Than
Not Available
Not Equal
Not Greater Than
Not Less Than
Value
Contains the value defined for the selected operator. The value is used by the condition. Each
value supports variable expansion. For more information, see
on page 35. The operators that contain the value field are:
Equal
Greater Than
Less Than
Not Equal
Not Greater Than
Not Less Than
<operation-data>
Section 3.6, "Variable Selector," on page
Returns True When...
There is an operation property with the specified name on the current
operation.
There is an operation property with the specified name on the current
operation, and its value equals the provided content when compared by
using the specified comparison mode.
There is an operation property with the specified name on the current
operation, and its value is greater than the content of the condition when
compared by using the specified comparison mode.
There is an operation property with the specified name on the current
operation, and its value is less than the content of the condition when
compared by using the specified comparison mode.
Available would return False.
Equal would return False.
Greater Than or Equal would return False.
Less Than or Equal would return False.
element within an operation. It is
35.
Section 3.6, "Variable Selector,"
Conditions 219