Value Displayed in Multiple Formats
Figure 9-7
9.4.6 Reverting Changes in the Hex Editor
If you make a change in the Hex editor and want to undo it:
1 Right-click in the Hex editor, then select Undo.
The last change you had made is undone.
If you decide you want that change back:
1 Right click in the Hex editor, then select Redo.
The change that was undone is now redone.
9.4.7 Deleting Data in the Hex Editor
You can delete a single byte of data by pressing the Delete key. The Hex editor also allows you to
delete sections of data from the table:
1 Right-click in the Hex editor, then select Delete.
2 Specify the amount of data to delete in bytes or kilobytes, then click OK.
Testing Policies with the Policy Simulator 161