Matching - Subscriber Mirrored - Ldap Format; Creating A Policy; Importing The Predefined Rule - Novell POLICY IN DESIGNER 3.5 - 09-18-2009 Manual

8.12 Matching - Subscriber Mirrored - LDAP
Format
This rule matches for objects in the data store by using the mirrored structure in the Identity Vault
from a specified point. Implement the rule on the Matching policy in the driver. You can implement
the rule only on the Subscriber channel.
There are two steps involved in using the predefined rules: creating a policy in the Matching policy
set and importing the predefined rule. If you already have a Matching policy that you want to add
this rule to, skip to Importing the Predefined
Section 8.12.1, "Creating a Policy," on page 129
Section 8.12.2, "Importing the Predefined Rule," on page 129
Section 8.12.3, "How the Rule Works," on page 130

8.12.1 Creating a Policy

1 From the Outline view or the Policy Flow view, select the Subscriber channel.
2 Select the Matching policy set in the Policy Set view, then click Create or add a new policy to
the Policy Set icon
3 Click Create a new policy, then click Next.
4 Name the policy.
5 Use the default location or browse and select another location to place the policy in the driver.
6 Select Open Editor after creating policy, then click Next.
7 Select DirXML Script for the type of policy, then click Finish.
8 A file conflict window appears with the message "
to save. Do you wish to save the editor's changes and continue?
The Policy Builder is launched and the new Matching policy is saved.
9 Continue with
Importing the Predefined

8.12.2 Importing the Predefined Rule

1 Right-click in the Policy Builder, then click New > Predefined Rule > Insert Predefined Rule
Before or Insert Predefined Rule After.
2 Select Matching - Subscriber Mirrored - LDAP format, then click OK.
Rule.
to create a new policy.
Rule.
Before editing this item you need
" Click Yes.
Using Predefined Rules 129