If Destination Attribute - Novell POLICY IN DESIGNER 3.5 - 09-18-2009 Manual

If Destination Attribute

Performs a test on attribute values of the current object in the destination data store. The test
performed depends on the specified operator.
Fields
Name
Specify the name of the attribute to test. Supports variable expansion. For more information,
see Section 3.6, "Variable Selector," on page
Operator
Select the condition test type.
Operator
Available
Equal
Greater Than
Less Than
Not Available
Not Equal
Not Great Than
Not Less Than
Value
Contains the value defined for the selected operator. The value is used by the condition. Each
value supports variable expansion. For more information, see
on page
Equal
Greater Than
Less Than
Not Equal
198 Policies in Designer 3.5
Returns True When...
There is a value available in the destination data store for the specified
attribute.
There is a value available for the specified attribute in the destination data
store that equals the specified value when compared by using the
specified comparison mode.
There is a value available for the specified attribute in the destination data
store that is greater than the content of the condition when compared by
using the specified comparison mode. If
content must be a set of
text.
There is a value available for the specified attribute in the destination data
store that is greater than the content of the condition when compared by
using the specified comparison mode. If
content must be a set of
text.
Available would return False.
Equal would return False.
Greater Than or Equal would return False.
Less Than or Equal would return False.
35. The operators that contain the value field are:
35.
mode="structured"
<component> elements; otherwise, it must be
mode="structured"
<component> elements; otherwise, it must be
Section 3.6, "Variable Selector,"
, the
, the