If Operation Attribute - Novell POLICY IN DESIGNER 3.5 - 09-18-2009 Manual

If Operation Attribute

Performs a test on attribute values in the current operation. The test performed depends on the
specified operator.
Fields
Name
Specify the name of the attribute to test. Supports variable expansion. For more information,
see Section 3.6, "Variable Selector," on page
Operator
Select the condition test type.
Operator
Available
Changing
Changing From
Changing To
Equal
Greater Than
Less Than
35.
Returns True When...
There is a value available in the current operation (
or ) for the specified attribute.
value> <attr>
The current operation contains a change (
attr> ) of the specified attribute.
The current operation contains a change that removes a value
( <remove-value> ) of the specified attribute that equals the content of
the condition when compared by using the specified comparison mode. If
mode=structured , then the content must be a set of
Otherwise, it must be text.
The current operation contains a change that adds a value (
or ) to the specified attribute that equals the content
value> <add-attr>
of the condition when compared by using the specified comparison mode.
If mode=structured, then the content must be a set of
Otherwise, it must be text.
<component>'s.
There is a value available in the current operation (other than a
) for the specified attribute that equals the content of
<remove-value>
the condition when compared by using the specified comparison mode. If
mode=structured , then the content must be a set of
Otherwise, it must be text.
Supports variable expansion.
There is a value available in the current operation (other than a
<remove-value> ) for the specified attribute that is greater than the
content of the condition when compared by using the specified
comparison mode. If mode=structured,
of . Otherwise, it must be text.
<component>'s
Supports variable expansion.
There is a value available in the current operation (other than a
<remove-value> ) for the specified attribute that is less than the content
of the condition when compared by using the specified comparison mode.
If , then the content must be a set of
mode=structured
<component>'s . Otherwise, it must be text.
Supports variable expansion.
<add-attr> , <add-
<modify-attr> or <add-
<component>'s
<add-
<component>'s
then the content must be a set
.
.
Conditions 215