Placement - Subscriber Flat - Ldap Format; Creating A Policy; Importing The Predefined Rule - Novell POLICY IN DESIGNER 3.5 - 09-18-2009 Manual

8.17 Placement - Subscriber Flat - LDAP Format

This rule places objects from the Identity Vault into one container in the data store. Implement the
rule on the Subscriber Placement policy in the driver.
There are two steps involved in using the predefined rules: creating a policy in the Placement policy
set and importing the predefined rule. If you already have a Placement policy that you want to add
this rule to, skip to
Section 8.17.1, "Creating a Policy," on page 138
Section 8.17.2, "Importing the Predefined Rule," on page 138
Section 8.17.3, "How the Rule Works," on page 139

8.17.1 Creating a Policy

1 From the Outline view or the Policy Flow view, select the Publisher channel.
2 Select the Placement policy set in Policy Set view, then click Create or add a new policy to the
Policy Set icon
3 Click Create a new policy, then click Next.
4 Name the policy.
5 Use the default location or browse and select another location to place the policy in the driver.
6 Select Open Editor after creating policy, then click Next.
7 Select DirXML Script for the type of policy, then click Finish.
8 A file conflict window appears with the message "
to save. Do you wish to save the editor's changes and continue?
The Policy Builder is launched and the new Placement policy is saved.
9 Continue with

8.17.2 Importing the Predefined Rule

1 Right-click in the Policy Builder, then click New > Predefined Rule > Insert Predefined Rule
Before or Insert Predefined Rule After.
2 Select Placement - Subscriber Flat - LDAP format, then click OK.
3 Expand the predefined rule.
138 Policies in Designer 3.5
Importing the Predefined
to create a new policy.
Importing the Predefined
Rule.
Before editing this item you need
Rule.
" Click Yes.