Command Transformation - Create Departmental Container - Part 1 And Part 2; Creating A Policy - Novell POLICY IN DESIGNER 3.5 - 09-18-2009 Manual

The Predefined Rules dialog box displays a list of the available rules.
8.1 Command Transformation - Create
Departmental Container - Part 1 and Part 2
This rule creates a department container in the destination data store, if one does not exist.
Implement the rule on the Command Transformation policy in the driver. You can implement the
rule on either the Subscriber or the Publisher channel or on both channels.
There are two steps involved in using the predefined rules: creating a policy in the Command
Transformation policy set and importing the predefined rule. If you already have a Command
Transformation policy that you want to add this rule to, skip to
Section 8.1.1, "Creating a Policy," on page 110
Section 8.1.2, "Importing the Predefined Rule," on page 111
Section 8.1.3, "How the Rule Works," on page 112

8.1.1 Creating a Policy

1 From the Outline view or the Policy Flow view, select the Publisher or Subscriber channel.
2 Select the Command Transformation policy set in the Policy Set view, then click Create or add
a new policy to the Policy Set icon
3 Click Create a new policy, then click Next.
110 Policies in Designer 3.5
Importing the Predefined
to create a new policy.
Rule.