Action Argument Component Builder; Section 4.7, "Action Argument Component Builder - Novell POLICY IN DESIGNER 3.5 - 09-18-2009 Manual

teleNumber
time
3 Specify the value, then click OK.

4.7 Action Argument Component Builder

To launch the Action Argument Component Builder, select one of the following actions when the
Select Value Type selection is structured, then click the Edit the components icon
Add Destination Attribute Value (page 236)
Add Source Attribute Value (page 242)
Reformat Operation Attribute (page 270)
Remove Destination Attribute Value (page 273)
Remove Source Attribute Value (page 276)
Set Destination Attribute Value (page 286)
Set Source Attribute Value (page 297)
Add Destination Attribute Value Action
Figure 4-5
1 Make sure the value type is set to structured, then click the Edit the components icon
2 Create the value of the action component.
You can type the value, or click the Edit the arguments
Argument Builder.
3 Click Finish.
.
icon to create the value in the
Using Additional Builders and Editors
.
57