Add Destination Object - Novell POLICY IN DESIGNER 3.5 - 09-18-2009 Manual

Add Destination Object

Creates an object of the specified type in the destination data store, with the name and location
specified in the Enter DN field. Any attribute values to be added as part of the object creation must
be done in subsequent Add Destination Attribute Value actions, using the same DN.
Fields
Class Name
Specify the class name of the object to be created. Supports variable expansion. For more
information, see
Mode
Select whether this action should be added to, before, or after the current operation, or written
directly to the destination data store.
DN
Specify the DN of the object to be created.
Remarks
Any attribute values to be added as part of the object creation must be done in subsequent
Destination Attribute Value
Example
The example creates the department container that is needed. The rule is from the predefined rules
that come with Identity Manager. For more information, see
Transformation - Create Departmental Container - Part 1 and Part 2," on page 110
predefined rules. To see the policy in XML, see
predef_command_create_dept_container1.xml
predef_command_create_dept_container1.xml)
predef_command_create_dept_container2.xml
predef_command_create_dept_container2.xml).
238 Policies in Designer 3.5
Section 3.6, "Variable Selector," on page
actions, using the same DN.
35.
Section 8.1, "Command
(../samples/
and
(../samples/
Add
from the