Single; Work - Novell GROUPWISE 7 GATEWAY - INSTALLATION AND ADMINISTRATION Installation And Administration Manual

Example:
/rt-3
See also /st.

/single

Instructs the gateway to run for one send/receive cycle, then shut down. For information about the
send/receive cycle, see
Syntax:
/single
/st
Specifies the number of sender threads that the Notes Gateway should start. The default it 4. Valid
values range from 1 to 4. See
Syntax:
/st-threads
Example:
/st-3
See also /rt.

/work

Indicates the path where temporary files are stored while messages are transferred. You can use a
path to a location on the Windows server where the gateway is running or on the server where the
domain directory is located. For more information, see
Syntax:
/work-[drive:]\directory
/work-\\server\sharename\directory
Example:
/work-\lngate\work
/work-m:\lngate\work
/work-\\server2\c$\lngate\work
"Adjusting the Gateway's Send/Receive Cycle" on page
"Adjusting the Number of Sender and Receiver Threads" on page
Using Notes Gateway Startup Switches
"Reducing Network Traffic" on page
81.
82.
84.
91