Novell GROUPWISE 7 GATEWAY - INSTALLATION AND ADMINISTRATION Installation And Administration Manual page 85

10
Using Notes Gateway Startup Switches
Startup switches let you set various operational parameters for the gateway. Some startup switches
override configuration information, such as logging level, that you can set in ConsoleOne
switches provide configuration options not available anywhere else.
To use a startup switch, you can include it on the command line immediately following the ngate
executable command.
Example:
ngate /badmsg-send
You can also edit the Notes Gateway startup file (notes.cfg) to include the switches you want to
use when starting the gateway. The notes.cfg file is located in the
Use the following syntax to include the startup file:
Example:
ngate @notes.cfg
The table below summarizes Notes Gateway startup switches and how they correspond to
configuration settings in ConsoleOne.
Startup Switch ConsoleOne Setting
/badmsg N/A
/blockdoms N/A
/corr N/A
/group N/A
/help N/A
/home N/A
/httppassword HTTP Password
/httpport HTTP Port
/httprefresh N/A
/httpuser HTTP Username
/ic N/A
/ip TCP/IP Address
/lnsmb N/A
/log Log File Path
domain\wpgate\notes
Using Notes Gateway Startup Switches
®
. Other
directory.
85