Binding The Notes Gateway To A Specific Ip Address - Novell GROUPWISE 7 GATEWAY - INSTALLATION AND ADMINISTRATION Installation And Administration Manual

Notes Gateway Web Console
You can adjust these settings for the current gateway session on the
page.

Binding the Notes Gateway to a Specific IP Address

You can now cause the Notes Gateway to bind to a specified IP address when the server where it
runs uses multiple IP addresses. The specified IP address is associated with all ports used by the
gateway. Without an exclusive bind, the gateway binds to all IP addresses available on the server.
Corresponding Startup Switches
You can also use the
bind to the specified IP address.
64
GroupWise 7 Gateway for Lotus Notes Installation and Administration Guide
to Notes delivery, non-delivery, and receipt reports. For tracking purposes, each message
receives its own record in the correlation database (domain\wpgate\notes\gwcorr.db).
Correlation Age: Specify the number of days you want a message's record to remain in the
correlation database. After a message's record has been deleted, any status information
returned on the message is sent to the user as a new message rather than as status information
on the old message.
5
Click OK to save the changes.
ConsoleOne passes the status message information to the Notes Gateway so that status
messages and correlation start immediately.
6
If you edited the notes.cfg file in
the updated startup file.
1
In ConsoleOne, browse to and right-click the Notes Gateway object, then click Properties.
2
Click GroupWise > Network Address to display the Network Address page.
3
Select Bind Exclusively to TCP/IP Address, then click OK to save your change.
/ip startup switch in the Notes Gateway startup file to establish an exclusive
Step 1, stop and then start the Notes Gateway so that it reads
Optional Gateway Settings