Loglevel; Logmax; Noalias - Novell GROUPWISE 7 GATEWAY - INSTALLATION AND ADMINISTRATION Installation And Administration Manual

Syntax:
logdays-days
Example:
/logdays-30
See also /log, /loglevel, and /logmax.

/loglevel

Overrides the log level specified in ConsoleOne. Possible options are Off, Normal, Verbose, and
Diagnostic. See
Syntax:
/loglevel-level
Example:
/loglevel-verbose
See also /log, /logdays, and /logmax.

/logmax

Overrides the maximum log file disk space specified in ConsoleOne. If the maximum disk space
limit is reached, the oldest log file is deleted to make room for a new one. Specify the number of
kilobytes you want to use. The default is 1024 KB or 1 MB. The range is from 256 KB to unlimited
size. Use 0 (zero) for unlimited disk space. See
Syntax:
/logmax-kilobytes
Example:
/logmax-2048
See also /log, /loglevel, and /logdays.

/noalias

Specifies whether the Notes Gateway should use the Notes user's full name (first name and last
name) or the user's short name (typically first initial plus last name or "alias"). By default, the
gateway uses the short name. Use of the switch causes the gateway to use the full name.
Syntax:
/noalias
/rt
Specifies the number of receiver threads that the Notes Gateway should start. The default it 4.
There is no limit to the number of threads you can start, but nothing is gained by starting threads
that are always idle. See
Syntax:
/rt-threads
90
GroupWise 7 Gateway for Lotus Notes Installation and Administration Guide
"Using Notes Gateway Log Files" on page
"Adjusting the Number of Sender and Receiver Threads" on page
75.
"Using Notes Gateway Log Files" on page 75.
82.