Running The Notes Gateway; Starting The Notes Gateway; Starting The Notes Gateway As A Windows Application - Novell GROUPWISE 7 GATEWAY - INSTALLATION AND ADMINISTRATION Installation And Administration Manual

6

Running the Notes Gateway

After you have installed the Notes Gateway software and configured both sides of the gateway,
you are ready to start the gateway.
After the Notes Gateway has started successful, continue with
Gateway," on page 45

Starting the Notes Gateway

Before you start the Notes Gateway, make sure that it has network access to the following
locations:
Make sure that the Notes client is running on the Notes Gateway server, then follow the
instructions for the installation method you chose for the Notes Gateway
IMPORTANT:
establishes the links to the non-GroupWise domain that represents the Notes system.

Starting the Notes Gateway As a Windows Application

"Starting the Notes Gateway" on page 39
"Acquainting E-Mail Users with the Notes Gateway" on page 40
"Stopping the Notes Gateway" on page 42
"Uninstalling the Notes Gateway" on page 42
®
The GroupWise domain directory and subdirectories where you installed the gateway files.
The gateway requires Read, Write, Create, Erase, Modify, and File Scan rights.
The Notes/Domino server. If you installed the Notes Gateway on a server other than the
Notes/Domino server (the recommended configuration), you should have already provided
access when you configured the Notes side of the gateway, as described in
and Database Access for the Notes Gateway User" on page 30
"Starting the Notes Gateway As a Windows Application" on page 39
"Starting the Notes Gateway As a Windows Service" on page 40
After you start the gateway, stop and then start the MTAs in the GroupWise system. This
1
At the Windows server where you installed the Notes Gateway, click Start > Programs.
2
Click GroupWise Notes Gateway > Notes > GroupWise Notes Gateway.
Chapter 7, "Configuring the Notes
"Setting Up Server
(worksheet item
Running the Notes Gateway
7):
39