Changing The Link Protocol Between The Notes Gateway And The Mta - Novell GROUPWISE 7 GATEWAY - INSTALLATION AND ADMINISTRATION Installation And Administration Manual

where gateway_name is the name of the Notes Gateway established during installation as
described in
Examples:
Notes:Provo.SJones
Notes:"SJones@Provo"
Explicit Addressing from Notes to GroupWise
To send a message to a GroupWise user using explicit addressing, Notes users must use the
following syntax in the To line:
Syntax:
domain.post_office.userID@foreign_domain
where foreign_domain is the name of the Notes foreign domain, as set up following the
instructions in
Example:
Corporate.Marketing.LTanaka@GroupWise
If the user ID is unique in the GroupWise system, then shorter syntax can be used:
Syntax:
userID@foreign_domain
Example:
LTanaka@GroupWise
Changing the Link Protocol between the Notes Gateway and the
MTA
Before the GroupWise 7 Gateway for Lotus Notes, the Notes Gateway and the MTA
communicated by transferring message files through message queue directories using a mapped/
UNC link. Starting with the GroupWise 7 version of the gateway, you can configure the gateway
so that it uses a TCP/IP link to communicate with the MTA, instead of transferring message files
through queue directories. During installation, the Notes Gateway is configured for a mapped/
UNC link. You can reconfigure it to use a TCP/IP link in ConsoleOne.
"Choosing a Gateway Name" on page
"Defining the GroupWise System As a Notes Foreign Domain" on page
1
In ConsoleOne, right-click the Notes Gateway object, then click Properties.
2
Click GroupWise > Network Address.
16.
Configuring the Notes Gateway
26.
51