Starting The Notes Client On The Notes Gateway Server - Novell GROUPWISE 7 GATEWAY - INSTALLATION AND ADMINISTRATION Installation And Administration Manual

Starting the Notes Client on the Notes Gateway Server

This updates the local notes.ini file on the Notes Gateway server from that version of the notes.ini
file on the Notes/Domain server that you updated in
Notes" on page
Depending on the configuration of your Notes system, you might need to export the Notes user ID
file for the Notes Gateway user that was set up in
User" on page 28
the Notes Gateway will run before you can start the Notes client. You might need assistance from
the Notes system administrator the first time you start the Notes client for the Notes Gateway user.
Continue with
34
GroupWise 7 Gateway for Lotus Notes Installation and Administration Guide
4
Click the Person icon, select the Notes Gateway user
click OK.
5
From the User Type drop-down list in the Access Control List, select Person.
6
From the Access drop-down list, select either Manager or Editor.
7
Click OK.
8
Continue with Starting the Notes Client on the Notes Gateway
1
On the Notes Gateway server, exit the Notes/Domino Administrator.
2
Start the Notes client.
3
In the For User field, select the Notes Gateway user you created in
Gateway As a Notes User" on page
25.
from the Notes/Domino Administrator and copy it to the Windows server where
Chapter 5, "Configuring the GroupWise Side of the Notes Gateway," on page
(worksheet item
28, specify the password for the user, then click OK.
"Adding the GroupWise Address Book to
"Registering the Notes Gateway As a Notes
11), click Add, then
Server.
"Registering the Notes
35.