Using The Gateway Access Field On Individual User Objects - Novell GROUPWISE 7 GATEWAY - INSTALLATION AND ADMINISTRATION Installation And Administration Manual

[Corporate.Temps:Out]
Allow NetTech
[Default:In]
Allow SJones@XYZCorp
Allow CN=Sophie Jones/O=Sales@XYZCorp
The first example allows GroupWise users in the Temps post office to exchange messages with
the NetTech Notes domain but no others. The second example allows all users to receive messages
from a specified user.
MaxSize
This keyword determines the maximum size of messages that the Notes Gateway will transfer
between systems. Maxsize is specified in bytes (1000 = 1000 bytes or 1 KB), with a range from 0
to 2147483647.
Unless you have a reason to limit the message size (for example, you are charged for the amount
of data transferred by the gateway), you might not want to limit the message size. When
attachments are encoded as they pass through the gateway, they generally become larger.
Syntax:
Maxsize=number _of_bytes
Example:
[Corporate.Temps:In]
MaxSize=1000000
[Corporate.Temps:Out]
MaxSize=5000000
This example prevents GroupWise users in the Temps post office from receiving messages larger
than 1 MB and from sending messages larger than 5 MB.
AllowRuleGenerated
This keyword determines whether or not rule-generated messages are allowed through the Notes
Gateway. It applies only to outbound messages from GroupWise to Notes.
You could use this keyword to control rule-generated messages such as "On Vacation" from
entering the Notes system. Unlike NoAccess and Block, the gateway does not generate a status
message stating that the mail message was undeliverable. Instead, the message remains pending in
the sender's mailbox.
Syntax:
AllowRuleGenerated=Yes | No
Example:
[Default:Out]
AllowRuleGenerated=No
This example prevents all rule-generated messages from transferring from the GroupWise system
to the Notes system.

Using the Gateway Access Field on Individual User Objects

You can use the Gateway Access field on the GroupWise Account page of each User object in
ConsoleOne to control individual user access. This can be useful if you only have a few users
57
Configuring the Notes Gateway