Deployment Scenarios; Deploying Dsfw In A Non-Name-Mapped Setup; Deploying As A Single Domain; Deploying As Multiple Domains In A Forest - Novell OPEN ENTERPRISE SERVER 2.0 SP2 - DOMAIN SERVICE FOR WINDOWS Manual

Deployment Scenarios

4
This section describes deployment scenarios for name-mapped and non-name mapped scenarios:
Section 4.1, "Deploying DSfW in a Non-Name-Mapped Setup," on page 25
Section 4.2, "Deploying DSfW in a Name-Mapped Setup," on page 27
4.1 Deploying DSfW in a Non-Name-Mapped
Setup
In case of installing DSfW in a non-name-mapped setup, you are setting up a new tree in a DSfW
forest. Here the tree structure overlaps with the DNS namespace. Before you start the process of
installation, ensure you have read and understood the details in
Name-Mapped Setup.
The scenarios explained here are only indicative of the various ways in which you can deploy DSfW
server in your environment.
Section 4.1.1, "Deploying as a Single Domain," on page 25
Section 4.1.2, "Deploying as Multiple Domains in a Forest," on page 25

4.1.1 Deploying as a Single Domain

In this scenario, you have a single domain in the forest and have multiple DSfW servers acting as
domain controllers in the domain.
Deploying DSfW as a Single Domain
Figure 4-1
Domain
server 1
Controllers
In Figure 4-1 the example.com domain is served by 5 domain controllers.

4.1.2 Deploying as Multiple Domains in a Forest

"Width" on page 26
"Depth" on page 26
"Depth and Width" on page 27
dc=example, dc=com
server 2 server 3
Installation Prerequisites For a Non-
domain
server 4 server 5
Deployment Scenarios
4
25