Determining Gateway Links Between Systems - Novell GROUPWISE 7 GATEWAY - INSTALLATION AND ADMINISTRATION Installation And Administration Manual

Using the Notes Gateway Web Console
You can also monitor the Notes Gateway from its Web console. The Notes Gateway Web console
enables you to monitor and control the Notes Gateway from any location where you have access
to a Web browser and the Internet. This provides substantially more flexible access than the Notes
Gateway server console or an SNMP monitoring program.
NOTES GATEWAY INSTALLATION WORKSHEET
Under
Gateway, follow the instructions in
Notes Gateway Web console.
Using an SNMP Monitoring Program
If desired, you can monitor the Notes Gateway from the Management and Monitoring component
of Novell ZENworks
configured, the Notes Gateway sends SNMP traps to network management consoles for display
along with other SNMP monitored programs.
NOTES GATEWAY INSTALLATION WORKSHEET
Under
You must enable SNMP during gateway installation. You cannot add this functionality after
installation. In order for the option to be offered during installation, the Windows server where you
install the gateway must have the SNMP service installed.
The SNMP service is usually not included during the initial Windows operating system
installation. To add or configure the SNMP service on the server where you will install and run the
Notes Gateway, you must be logged in as a member of the Administrator group.
To add the SNMP service to a Windows 2000/2003 server:

Determining Gateway Links between Systems

In order for the Notes Gateway to perform directory synchronization and exchange in addition to
message exchange, you must set up a representation of the Notes system in your GroupWise
system and a representation of your GroupWise system in your Notes system.
In GroupWise, non-GroupWise systems are represented by non-GroupWise domains.
NOTES GATEWAY INSTALLATION WORKSHEET
Under
to use in GroupWise to represent the Notes system. This non-GroupWise domain will be created
automatically the first time you start the Notes Gateway.
18
GroupWise 7 Gateway for Lotus Notes Installation and Administration Guide
Item 6: Monitoring Options, mark Notes Gateway Web console. After installing the Notes
®
or any other SNMP management and monitoring program. When properly
Item 8: Enable SNMP?, mark whether you want to configure the Notes Gateway for SNMP.
1
From the Control Panel, double-click Add/Remove Programs.
2
Click Add/Remove Windows Components.
3
Select Management and Monitoring Tools.
4
Click Details, then select Simple Network Management Protocol.
Item 12: Non-GroupWise Domain for Notes System in
"Using the Notes Gateway Web Console" on page 70
GroupWise, specify the name you want
to set up the