Novell GROUPWISE 7 GATEWAY - INSTALLATION AND ADMINISTRATION Installation And Administration Manual page 58

whose access you want to control. If you have many users whose access you want to control, you
should use the access.cfg file, as described in
Directory" on page
58
GroupWise 7 Gateway for Lotus Notes Installation and Administration Guide
53.
1
If desired, create an access control group in the
2
In ConsoleOne, browse to and right-click the user whose access you want to control, then
click Properties.
3
Click GroupWise > Account to display the Account page.
4
Fill in the Gateway Access field.
If you created an access control group in the access.cfg file in
access control group that you want this user to be associated with.
If you have not created an access control group, you can put access control information unique
to this user in the Gateway Access field.
Syntax:
gateway.direction:keyword,keyword,...,keyword;gateway.direction:keyword,...,keyword
The following keywords are valid in the Gateway Access field:
AllAccess
NoAccess
MaxSize
AllowRuleGenerated
IMPORTANT:
The Block
only be used in the access.cfg file.
Example:
Notes.Out:MaxSize=500000,AllowRuleGenerated=No;Notes.In:Maxsize=500000
In this example, the gateway name is Notes, the maximum message size is 500 KB, and rule-
generated messages are prevented from leaving the GroupWise system. The gateway
direction designations and their keywords are separated by a semicolon (;).
"Using the Access.cfg File in the Gateway
and Allow keywords cannot be used in the Gateway Access field. They can
access.cfg file.
Step 1, specify the name of the