Installing The Rpm Containing Key For High Bandwidth Ssl Vpn; Section 4.5, "Installing The Rpm Containing Key For High Bandwidth Ssl Vpn - Novell ACCESS MANAGER 3.1 SP1 - SSL VPN SERVER GUIDE 03-17-2010 Manual

4 You are prompted to select an installation.
5 When prompted to install the Novell SSL VPN Agent, press Enter.
6 Review and accept the License Agreement.
7 (Conditional) If the SSL VPN machine has been configured with multiple IP addresses, select
an IP address for the SSL VPN server when you are prompted to do so.
8 Specify the IP address of the Administration Console when prompted.
9 Specify the name of the administrator for the Administration Console.
10 Specify the administration password.
11 Confirm the password.
12 Wait while the SSL VPN server is installed on your system and imported into the
Administration Console, which takes about 2 minutes.
The installation ends with the following message:
13 To verify the installation of the Access Gateway, continue with
Your SSL VPN Service Is Installed," on page
4.5 Installing the RPM Containing Key For High
Bandwidth SSL VPN
With this release, customers who are eligible to install high bandwidth SSL VPN can install the
RPM containing key for the high bandwidth SSL VPN after they get the export clearance. This key
is installed only once. There is no need to upgrade the RPM every time the servlet and the server
RPMs for SSL VPN are upgraded. In the previous releases, you needed to upgrade the high
bandwidth RPMs every time the SSL VPN server and servlet RPMs were upgraded.
You must install the high bandwidth SSL VPN if you want to cluster the SSL VPN servers.
After you have ordered the high bandwidth version, log in to the
www.novell.com/center)
for the high bandwidth version.
During SSL VPN installation, you are prompted to install the high bandwidth.
Step 4 on page 40) If you have export clearance, use the steps in this procedure to install the RPM,
then return to your installation of SSL VPN.
1 Download the following high bandwidth RPM:
novl-sslvpn-hb-key-3.1.0-0.noarch.rpm
2 Log in as
.
root
3 Enter the following command to stop all services:
/
etc/init.d/novell-sslvpn stop
4 Enter the following command to install the RPM for the high bandwidth version of SSL VPN:
rpm -ivh novl-sslvpn-hb-key-3.1.0-0.noarch.rpm
5 Enter the following command to restart all SSL VPN services:
/
etc/init.d/novell-sslvpn start
6 Enter the following command to check the status:
/
etc/init.d/novell-sslvpn status
and look for the link that allows you to download the RPM containing key
Installation complete.
Section 4.7, "Verifying That
42.
Novell Customer Center (http://
(Step 4 on page 33 or
Installing the SSL VPN Server 41