Novell ACCESS MANAGER 3.1 SP1 - SSL VPN SERVER GUIDE 03-17-2010 Manual page 40

Installing SSL VPN on a Separate Machine, on the Same Machine With the Identity
Server, or with the Administration Console
You can use an install script to install the traditional Novell SSL VPN on a separate machine with
the Identity Server on the same machine, or on the same machine with the Administration Console
or with the Identity Server and the Administration Console.
1 Do one of the following:
Insert the CD into the CD drive, then locate
Untar the RPMs.
2 At a command prompt, enter the following install script command:
./install.sh
You are prompted to select an installation.
3 Type 3 to install the ESP-Enabled SSL VPN, then press Enter.
4 (Optional) When you are prompted to replace the low bandwidth SSL VPN RPM with the high
bandwidth RPM, replace it if the security law permits you to do so.
For more information on the high bandwidth SSL VPN, see
Versions" on page
Section 4.5, "Installing the RPM Containing Key For High Bandwidth SSL VPN," on page
5 Review and accept the License Agreement.
6 (Conditional) If the SSL VPN machine has been configured with multiple IP addresses, select
an IP address for the SSL VPN server when you are prompted to do so.
7 Specify the name of the administrator for the Administration Console.
8 Specify the administration password.
9 Confirm the password.
10 Specify the IP address of the Administration Console.
11 Wait while the SSL VPN server is installed on your system and imported into the
Administration Console, which takes about 2 minutes.
The installation ends with the following message:
12 To verify the installation of the SSL VPN, continue with
VPN Service Is Installed," on page
Re-Installing SSL VPN on the Linux Access Gateway
If you have deleted the SSL VPN server that was installed along with the Linux Access Gateway,
follow the steps given below to re-install it:
1 Download and copy the Novell Access Manager
machine.
For the actual filenames, see the
documentation/novellaccessmanager/readme/accessmanager_readme.html).
2 Unpack the
tar -xzvf <filename>
3 At the command prompt, enter the following install script command:
./install.sh
40 Novell Access Manager 3.1 SP1 SSL VPN Server Guide
15. For more information on installing the high bandwidth SSL VPN, see
42.
Novell Access Manager Readme (http://www.novell.com/
file by using the following command:
tar.gz
.
install.sh
"High and Low Bandwidth
Installation complete.
Section 4.7, "Verifying That Your SSL
files to the Linux Access Gateway
tar.gz
41.