Installing The Ssl Vpn Server; Prerequisites; Limitations With 64-Bit Software; Section 4.1, "Prerequisites - Novell ACCESS MANAGER 3.1 SP1 - SSL VPN SERVER GUIDE 03-17-2010 Manual

Installing the SSL VPN Server

4
You can deploy SSL VPN either as a Traditional SSL VPN or as an ESP-enabled SSL VPN.
Section 4.1, "Prerequisites," on page 29
Section 4.2, "Limitations With 64-Bit Software," on page 29
Section 4.3, "Installing ESP-Enabled SSL VPN," on page 30
Section 4.4, "Installing the Traditional Novell SSL VPN," on page 34
Section 4.5, "Installing the RPM Containing Key For High Bandwidth SSL VPN," on page 41
Section 4.6, "Uninstalling the RPM Containing Key For High Bandwidth SSL VPN," on
page 42
Section 4.7, "Verifying That Your SSL VPN Service Is Installed," on page 42

4.1 Prerequisites

The SSL VPN server requires the following software and hardware:
100 MB of disk space
Network interface card
®
SUSE Linux Enterprise Server (SLES) 10 SP2 or SP3
package
gettext
All ports used by SSL VPN must be opened. By default, SSL VPN uses TCP port 443 or 7777,
and 7778.
NOTE: Port 7778 is not required if UDP is selected on port 7777 or 443.
You have root privileges.
You have the following information:
IP address of the SSL VPN server
IP address of the Administration Console
You have downloaded the relevant RPMs from the Novell
install CD.

4.2 Limitations With 64-Bit Software

SSL VPN has the following limitations, if the client or the server is running the 64-bit platforms:
No Kiosk Mode Support for 64-bit Clients
In Enterprise mode, if the clients are running 64-bit operating software, they cannot use 64-bit
browsers to establish the SSL VPN connection.
®
Download site or you have the
Installing the SSL VPN Server
4
29