Novell ACCESS MANAGER 3.1 SP1 - SSL VPN SERVER GUIDE 03-17-2010 Manual page 76

3 Specify the following NAT/L4 configuration as follows:
Behind NAT/L4: Select the check box to specify that the SSL VPN Gateway is behind NAT.
Public IP Address: This field is enabled when the Behind NAT check box is selected. Specify
the public IP address (that is, the address exposed to the Internet user) that translates into the
SSL VPN Gateway IP address. This is the IP address where the external user on the Internet
must be able to access the SSL VPN server.
Port: Specify a port number for Kiosk mode as well as for Enterprise mode when the SSL
VPN server is behind an L4 or a NAT.
Protocol: Specify a protocol for Kiosk mode as well as for Enterprise mode, when the SSL
VPN server is behind an L4 or a NAT. The protocol is TCP for Kiosk mode and UDP for
Enterprise mode.
4 Specify the device-specific configuration as follows:
Cluster Member: Select the cluster member from a list of IP addresses.
Listening IP Address: Specify the IP address that the SSL VPN listens on.
Port: Specify a port number for Kiosk mode as well as for Enterprise mode when the SSL
VPN server is behind an L4 or a NAT. Make sure that the port you specify here is free.
76 Novell Access Manager 3.1 SP1 SSL VPN Server Guide