Configuring Dns Servers For Kiosk Mode; Configuring Certificate Settings - Novell ACCESS MANAGER 3.1 SP1 - SSL VPN SERVER GUIDE 03-17-2010 Manual

5 To delete a DNS server or a domain, select the check box next to the field and click Delete in
the section.
6 To save your modifications, click OK, then click Update on the Configuration page.

13.1.2 Configuring DNS Servers for Kiosk Mode

The DNS servers can be configured for Kiosk mode either during installation or by using YaST The
configuration procedure is dependent on whether you have installed SSL VPN and the Linux Access
Gateway on the same machine or on separate machines.
NOTE: You must configure the DNS server for both Kiosk mode and Enterprise mode. For
information on configuring DNS servers for Enterprise mode, see
DNS Servers for Enterprise Mode," on page
"Configuring DNS Servers During Installation" on page 86
"Configuring DNS Servers After the Installation" on page 86
Configuring DNS Servers During Installation
If you are installing SSL VPN and the Linux Access Gateway on the same machine, you can
configure DNS Servers during the Linux Access Gateway installation. For more information, see
"Installing the Linux Access Gateway
Installation
Configuring DNS Servers After the Installation
If you are installing SSL VPN and the Linux Access Gateway on separate machines, you can
configure DNS servers in the
1 In YaST, select Network Devices > Network Cards, then press Enter.
2 Select Change, then press Enter.
3 Select Edit, then press Enter.
4 Select Hostname and Name Servers, then press Enter.
5 Specify the IP addresses of the DNS servers that you want to add.
6 Specify the domain names.
7 Click OK.
Verify that the DNS servers and domain names are added to the

13.2 Configuring Certificate Settings

Access Manager components and agents can access the keystore to retrieve certificates, keys, and
trusted roots as needed.
Before you proceed with this section, make sure you have already created a certificate. For more
information on creating certificates, see
Manager 3.1 SP1 Administration Console
86 Novell Access Manager 3.1 SP1 SSL VPN Server Guide
Guide.
/etc/resolv.conf
85.
Appliance" in the Novell Access Manager 3.1 SP1
file by using YaST as follows:
"Security and Certificate Management"Novell Access
Guide.
Section 13.1.1, "Configuring
file.
/etc/resolv.conf