Novell ACCESS MANAGER 3.1 SP1 - SSL VPN SERVER GUIDE 03-17-2010 Manual page 39

For more information on a standard installation of the Linux Access Gateway, refer to
Standard Linux Installation with the Default
Installation Guide.
1 Start the standard installation of the Linux Access Gateway. For details, refer to
Standard Linux Installation with the Default
Installation Guide.
2 In the Access Administrator Configuration section in the Novell Linux Access Gateway
Configuration page, select the Enable On Box SSL VPN Server check box to install and
configure SSL VPN on the Linux Access Gateway.
3 Follow the on-screen instructions to continue with the Linux Access Gateway installation.
Advanced Installation
For an advanced installation of Linux Access Gateway, use the following steps to install SSL VPN:
1 Start the advanced installation of the Linux Access Gateway. For details, refer to
Linux Access Gateway
2 On the Access Administrator Configuration page, select Enable On Box SSL VPN Server. This
installs SSL VPN along with the Linux Access Gateway.
3 Click Accept.
The Installation Settings page is displayed. If the installation is successful, SSL VPN is
displayed in the Software section.
4 Follow the on-screen instructions to continue with the Linux Access Gateway installation.
Settings" in the
Settings" in the
Appliance" in the Novell Access Manager 3.1 SP1 Installation
Novell Access Manager 3.1 SP1
"Using a
Novell Access Manager 3.1 SP1
"Installing the
Installing the SSL VPN Server
"Using a
Guide.
39