Creating A Cluster Of Ssl Vpn Servers - Novell ACCESS MANAGER 3.1 SP1 - SSL VPN SERVER GUIDE 03-17-2010 Manual

Creating a Cluster of SSL VPN
2 1
Servers
The system automatically enables clustering when multiple SSL VPN servers exist in a group. To
create an SSL VPN cluster, you must create a cluster of SSL VPNs after you install an SSL VPN
server, then assign one or more SSL VPN servers to that cluster.The Access Manager software
configuration process is the same whether there is one server or multiple servers in a cluster.
This section describes how to set up and manage a cluster of SSL VPN servers:
Section 21.1, "Creating a Cluster of SSL VPN Servers," on page 125
Section 21.2, "Adding An SSL VPN Server to a Cluster," on page 126
Section 21.3, "Removing an SSL VPN Server from a Cluster," on page 127

21.1 Creating a Cluster of SSL VPN Servers

To create a new SSL VPN server cluster, you start by creating a cluster configuration with a primary
server.
1 In the Administration Console, click Devices > SSL VPNs > Servers.
2 Select the SSL VPN server that you want to add to the cluster, then click New Cluster.
The New Cluster dialog box appears.
3 Specify a name for the cluster configuration. If you selected the server in the previous step, the
IP address of the server is displayed in the Primary Server drop-down list. If you have not
selected a server in the previous step, you can now select the server or servers that you want to
assign to this configuration.
4 Click OK.
5 Click the cluster configuration name that you created.
Creating a Cluster of SSL VPN Servers
21
125