Novell ACCESS MANAGER 3.1 SP1 - SSL VPN SERVER GUIDE 03-17-2010 Manual page 82

The SSL VPN Advanced Configuration page is displayed.
3 If the SSL VPN server is a member of a cluster, the Cluster Member option is displayed. The
SNAT Entry configuration is specific to different cluster members. Select the IP address of the
cluster member for which you want to configure the SNAT entry.
4 To configure a new SNAT entry click New.
The New dialog box opens.
5 Specify the information in the following format:
--protocol (-p): This is an optional parameter. To specify a protocol, select a protocol from the
list. The protocol can be ANY, UDP, TCP or ICMP. By default, the ANY option is selected.
--source (-s): Specifies the IP address of the subnet pool where SSL VPN assigns the IP
address to each client in Enterprise mode.
NOTE: This field is populated by the Enterprise mode IP address by default. But, you can edit
the value in this field if you want to use this field to add iptables SNAT entries for other cases in
Kiosk mode such as for full tunneling.
82 Novell Access Manager 3.1 SP1 SSL VPN Server Guide