Novell ACCESS MANAGER 3.1 SP1 - SSL VPN SERVER GUIDE 03-17-2010 Manual page 79

The values specified in the Subnet Address and Subnet Mask fields determine the IP addresses
that are assigned to the clients. Make sure that the assigned IP address and the IP address of the
client do not match.
5 Specify the other configuration as follows:
Cluster Communications Port: Specify the port that is used for communication between the
cluster members.
Inactivity Timeout (Minutes): You can configure the time in minutes. If no data exchange
takes place during the stipulated time, the connection is closed so that the resources are freed to
allow additional incoming connections. The inactivity timeout period can be one minute to
1800 minutes. The default inactive timeout period is 30 minutes.
Encryption: Select the type of encryption. It can be either AES128 or AES 256.
Server Debug Level: Set this option to On if you want to get more debug information from the
server. This option is set to Off by default.
Client Debug Level: Set this option to On if you want to get more debug information from the
client side. This option is set to Off by default.
6 To save your modifications, click OK, then click Update on the Configuration page.
Configuring the IP Address, Port, and NAT 79