Novell ACCESS MANAGER 3.1 SP1 - SSL VPN SERVER GUIDE 03-17-2010 Manual page 130

For more information on verifying the health, see
Service Is Installed," on page
3 Configure the L4, gateway details, and Audit event in the SSL VPN server.
For more information on configuring the L4 and gateway details, see
the IP Address, Port, and NAT," on page
events, see
4 Import the traffic policies into the server. For more information on importing the traffic
policies, see
5 Create a cluster of SSL VPNs.
For more information on creating a cluster, see
Servers," on page
6 Assign all SSL VPN servers to the cluster.
For more information, see
page 126. The configuration details specific to a cluster, such as the client integrity check
policies, traffic policies, and client policies are propagated to all the cluster members.
7 In the Administration Console, click Devices > SSL VPNs > Edit, then select the Gateway
configuration page. Configure specific listening IP addresses for Kiosk mode and Enterprise
modes and specific subnet mask and subnet addresses for Enterprise mode.
8 Select the Authentication Configuration link and configure the Embedded Service Provider
9 In the Embedded Service Provider Base URL, if you select HTTPS as the protocol, create and
use a custom certificate.
10 Restart the Tomcat server when prompted.
11 To save your modifications, click OK, then click Update on the Configuration page.
130 Novell Access Manager 3.1 SP1 SSL VPN Server Guide
42.
Chapter 25, "Enabling SSL VPN Audit Events," on page
Section 14.3.3, "Exporting and Importing Traffic Policies," on page 100
125.
Section 21.2, "Adding An SSL VPN Server to a Cluster," on
Section 4.7, "Verifying That Your SSL VPN
75. For more information on configuring the Audit
Section 21.1, "Creating a Cluster of SSL VPN
Chapter 11, "Configuring
141.