Novell ACCESS MANAGER 3.1 SP1 - SSL VPN SERVER GUIDE 03-17-2010 Manual page 94

Operating
System
Windows
94 Novell Access Manager 3.1 SP1 SSL VPN Server Guide
Attribute Type Attribute Name
Process Name: Specify the name of the executable file that must
be present in the client machine.
Version: Specify the version of software process that
must be running in the client machine.
RegistryKey: Specify the registry key name and absolute
path.
RegistryKeyValue: Specifies registry key value. The
value data found in this key value should be the absolute
path of the folder where the process file is present.
RegistryKey Name: Specify the name and absolute path of the registry
key that must be present in the client machine.
Value Name: Specify the name of the registry key value.
Value Data: Specify a data for the registry key value. This
data can be for registry type REG_BINARY,
REG_DWORD, REG_DWORD_LITTLE_ENDIAN,
REG_MULTI_SZ, or REG_SZ. The value for
REG_DWORD and REG_DWORD_LITTLE_ENDIAN, is
hexadecimal or decimal.The value of a REG_MULTI_SZ,
REG_SZ can be a string value or, numeric or
alphanumeric.And the value of REG_BINARY can be
binary or hexadecimal.
The Value name and Value data are separated by a
comparison operator such as
must always use
REG_BINARY. You can use any comparison operator with
other registry types
For example, if the Registry key name is specified as
RegKey
operator of
integrity check process looks for the presence of
with a value name
the client machine. If the registry is present with the
specified values, then the client passes the client integrity
check.
Absolute File Name: Specify the name and absolute path of the file that
must be present in the client machine.
Version: Specify the owner of the process.
Service Name: Specify the display name of the service.
Status: Specify the status of the process in the client
machine. The status of the process can be Running or
Stopped.
=, >. <, <=, >=.
= with a string or with the registry type
with a Value Name of
RegValue
and Value Data of
= RegData
value data
RegValue =
You
, comparison
, then, the client
RegKey
in
RegData