Novell ACCESS MANAGER 3.1 SP1 - SSL VPN SERVER GUIDE 03-17-2010 Manual page 71

NOTE: If the SSL VPN server and the Linux Access Gateway are installed on the same
machine, configure the loopback IP address 127.0.0.1 as the Web Server IP address. For more
information on configuring the loopback IP address, see
SSL VPN Connects Through a Forward Proxy," on page
Host Header: Select which hostname is forwarded to the Web server in the host header. If your
SSL VPN server has a DNS name, select Web Server Host Name.
Web Server Host Name: Specify the DNS name of the SSL VPN server.
4 Click OK.
5 To configure the default Identity Injection policy and protected resources, click the newly
added proxy service.
6 In the Path List section, make sure the Path is /sslvpn.
7 In the Path List section, select the /sslvpn check box, then click Enable SSL VPN. The Enable
SSL VPN pop-up is displayed.
8 Fill in the following fields:
Section 17.1, "Understanding How
109.
Accelerating the Traditional Novell SSL VPN 71