Electrically operated adjustments
Adjustment of seat height,
angle and reach
Adjustment of backrest angle
and lumbar support
C O M F O R T
Raise or lower the front
of control 1 to make the
front of the seat cushion
higher or lower.
Raise or lower the rear
of control 1 to make the
seat higher or lower.
Action control 1 to the
front or to the rear to
move the seat forward or
back.
Push the top of control 2
forward or back to adjust
the backrest angle.
Raise or lower control 2
to increase or decrease
the lumbar support.
Note: The seats can still be moved
on a temporary basis:
- when opening one of the front
doors.
- after switching off the ignition.
Heated seats
The front seats can be heated inde-
pendently. Use the controls placed
on the sides of the seats, turning
them to select one of three heating
levels:
0:
Off.
1:
Gentle heat.
2:
Medium heat.
3:
Strong heat.
The seat temperature will adjust ac-
cordingly.
Note: The heated seats will only op-
erate when the engine is running.
III
III
51