CITROEN C4 Handbook page 178

HAnDS-FREE tElEPHOnE
Your audio system may be Bluetooth
compatible. It allows you to connect
a mobile telephone for "hands free"
use and even to use its directory.
It permits you to twin up to four
telephones, to be able then to
connect whichever one you choose.
The Bluetooth® functions available
and the content of the display are
dependent on the type of mobile
telephone, its settings and the type
of contract you have. For this reason
it is advisable to make enquiries with
your telephone provider.
Prior to any operation:
- Your display should be lit up (key
in position M).
- Your telephone's
system must be activated.
twinning a telephone
Twinning a telephone
of having it recognised by the
Bluetooth system on your vehicle.
®
This then permits an instantaneous
connection.
Twinning can only be performed
with ignition switched on, display
illuminated, engine stopped. No other
telephone should be connected.
- The twinning must be performed
with the telephone
Bluetooth system activated.
®
XIII XIII
174
note:
Refer to the user instructions to
®
familiarise yourself with the features
of twinning.
- The telephone
Bluetooth
"C4" displays on your telephone.
You should then select "C4" on your
telephone controls. Next you must
choose whether or not to accept this
twinning then select, on screen C
using J, M
memories. Validate with a press on
button l or 7.
note:
You can select a memory already
attributed, although the telephone
twinned to this location will no longer
Bluetooth
®
be.
- Next the telephone asks you to
enter an identification code: 1234.
- Validate.
consists
note:
This entry may be demanded earlier
in the twinning sequence.
The telephone
to your
immediate access to the Bluetooth
functions, it may be necessary to
make a connection (see following
page "Configuration: Connecting a
and its
twinned mobile telephone").
Once the twinning is finished, you will
be able to connect your telephone
via the "Main menu".
A U D I O
detects the
system on your vehicle.
®
or 8, one of the 4
is now twinned
Bluetooth system. For
®
®
Connecting a twinned telephone
Each time you enter the vehicle, after
switching on the audio system, your
telephone is detected automatically.
If more than one telephone
present, the last telephone to have
been connected is the first to be
recognised.
note:
Disconnections may occur. You may
have to make a new connection
(see following page, "Configuration:
Connecting a twinned
telephone").
Remarks:
- In the event of a problem, it is
recommended to switch
telephone off and then on again.
- If you switch off your telephone
within the field of reception of
the Bluetooth system on your
®
vehicle, the next connection will
not be automatic. To
automatic connection,
have to connect your telephone
manually (see following
"Configuration: Connecting
twinned mobile telephone").
- If you are already in telephone
communication when the audio
system is turned on, the latter
detects the telephone.
- To avoid interference, you are
advised not to place your mobile
telephone close to your radio.
to accept an incoming call
Using button l or control 7 at the
steering wheel.
is
mobile
your
restore
you will
page,
a