Wear of brake discs, brake
pads and brake drums
The rate of wear of the brake pads
depends on the use of your vehicle
(urban use, frequent stops), and on
your style of driving or the type of
For information on checking the
discs and drums for wear, contact a
After washing the vehicle,
brake progressively to dry out
the brake linings.
M A I N T E N A N C E
Bleeding of water from the diesel
To be bled on a regular basis (at
every oil change).
To evacuate the water, slacken the
bleed screw or the water in diesel
fuel sensor, which is located at the
base of the filter, until water ceases
to flow out.
Then retighten the bleed screw or
the water in diesel fuel sensor.
HDi engines are of a highly technical nature.
All maintenance and repairs require specific qualifications
which only your CITROËN Dealer can guarantee.
HDi 135 and 140 engines
Remove the protection cover by
first unclipping point 1, then 3 and
4. Detach point 2 by pulling towards
you, then lift.
To reposition the protection cover,
attach point 2 first. Lower the cover,
keeping it centred. Clip points 1 and
4, pushing vertically and slightly