If the vehicle is moving, do
not select this position, even
Only engage reverse gear
when the vehicle is stationary.
If the vehicle is moving at
a very low speed, if reverse gear is
requested (position R) this will be
taken into account only when the
vehicle comes to a halt.
The "foot on brake" warning lamp
may flash in the instrument panel
to remind you to brake.
If the vehicle is moving at a high
speed, if reverse gear is requested
the warning lamp "N" will flash and
your vehicle will go automatically
into neutral. To re-engage a gear,
you have only to return the gear
lever to position A or M.
A sound signal indicates when
reverse gear is engaged.
If parking assistance is deactivated,
the sound signal for reverse gear
engaged is absent.
D R I V I N G
- Push the lever to change to a
- Pull the lever to change to a lower
The engine can only
be started if the brake
pedal is pressed and
The warning lamp "foot on
brake" flashes on the display.
With the engine running, before
accelerating away check the
position engaged by looking at
the lever grille or the rev counter :
R, A or M.
If you are stationary with the
engine running, take care to
leave your gear selector in
Press on button S, situated on the
The warning lamp "S" displays on
the rev counter.
This option can be activated either in
automatic mode or in manual mode.
Press again again on button S on
the lever grille.
The warning lamp "S" disappears
on the rev counter.
Note: the Sport option is deactivated